Silicon Carbide SIC-Boron Carbide Sintering Furnace

Silicon Carbide Sintering Furnace Product Introduction：

Silicon carbide vacuum sintering furnace equipment for boron carbide, silicon carbide, or other materials sintering vacuum sintering and atmosphere pressureless sintering.

Basic parameters of silicon carbide sintering furnace：

1 tow 1 standard structure configuration (1 set of power supply a set of furnace)

Use temperature up to: 2350 ℃, commonly used temperature 2300 ℃, commonly used constant temperature area size (600MM × 600MM × 1600MM, 500MM × 500MM × 1300MM). Any size can be customised according to customer's product requirements 

Even temperature area deviation: ≤ ± 10 ℃.

Temperature control mode: automatic, manual, room temperature to 1200 degrees using thermocouple temperature measurement, high temperature using imported infrared thermometer temperature measurement. Low and high temperatures are automatically switched.

Safety: the use of explosion-proof port and pressure relief valve double protection safety and reliability

Degree of automation: a key type furnace atmosphere automatic replacement, water, gas automatic detection, temperature control throughout the automatic temperature control

Temperature control precision: ±5℃

Cold limit vacuum: 3Pa

Working temperature: 2250℃ (argon atmosphere)

Design temperature: 2350℃ (argon atmosphere)      

Temperature rise speed: ≥10℃/min (full load, atmosphere, below 1500℃)

                                        ≥5℃/min (full load, atmosphere, 1800-2300℃)

Silicon Carbide SIC-Boron Carbide Sintering Furnace Product Advantages：

1. high degree of automation, can achieve a key replacement (furnace vacuum, argon process), the whole process of operation, water, electricity and gas automatic monitoring, touch screen simulation at any time to observe the operating state of the equipment, equipment alarm instructions, temperature curve, switching operations can be viewed and operated on the touch screen.

2. the real material, the furnace body is made of 304 stainless steel, in strict accordance with the pressure vessel standards, corrosion resistance and good airtight performance. Insulation materials are high-purity graphite felt, durable. Electrical components are imported or or within the brand, reliable operation.

3. high safety, the furnace part of the installation of automatic explosion-proof valve, safe and reliable. Inductor part of the flow switch installed separately, real-time monitoring of water flow. Power supply strictly and effectively set the over-current value and over-voltage value as required.

Product Showcase：